Candle Resources Inc.
Candle Production Solutions
Your Subtitle text

Used Machinery

24-MOLD MANUAL PILLAR MACHINE
This one-of-a-kind manual molding machine produces 3-inch diameter pillar candles in lengths adjustable up to 9 inches. The machine is easy to use and simplifies pillar candle making. Pillars are produced with a wick hole and a flat top. The machine has only been used for demonstrations and is in full operating condition.




SPECS
  • 24 aluminum molds and pistons
  • heavy-duty steel frame
  • water-tight main body
  • bed for mold housing
  • crank piston movement
  • complete set of molds, pistons, and pins installed
  • crank mechanism with high-ratio gear for piston bed lifting and lowering
  • endless-thread screws for balanced up and down machine movements
OPERATION
Liquid paraffin is poured on the machine bed filling the molds and creating an overpour. This excess wax takes up the shrinkage eliminating, in most cases, the need to top off candles with a second pour. The case of the machine houses the molds. Water is circulated in the case around the molds for mold warming and paraffin cooling. Cold water (15C - 59F) is circulated to shorten cooling and set-up times. Hot water (50C - 122F) can be circulated to heat the molds before wax pouring. (Customer supplies water heating/chilling unit.) Once shrinkage has taken place, lower the pins and scrape the overpour from the mold table. When candles are set, crank up the piston plate to eject the current batch of pillars onto the machine bed.

$4,200, as is.
Crating included.
Shipping is purchaser's responsibility. Ships from MA.

For further information contact crp@candleproduction.com or call 631-754-6372



TABLE-TOP MOLDING MACHINE FOR TAPERED VOTIVES
24-mold machine, air-cooled, bottom unloading.

This is a one-of-a-kind machine used for demonstrations only. Fully operational.

$600, as is.
Shipping is purchaser's responsibility. Ships from MA.

For further information contact crp@candleproduction.com or call 631-754-6372
Website Builder